Prep 40 Series Portable Compressed Air Treatment System

Van Air Systems Prep 40 Series Portable Compressed Air Treatment System

 

Equipment rental is a tough business. 
Your equipment on the job site will get
dinged, dented, and dropped. And the
operator will still demand 100 percent
performance. Sensitive equipment need
not apply.

The Prep 40 from Van Air Systems is a completely portable
compressed air treatment package engineered specifically for the
demands of the equipment rental industry. Drag it. Bang it. Rain,
wind, or sun. Under harsh conditions the Prep 40 still meets the
most stringent compressed air quality standards.

The Prep 40 will produce compressed air with a -40°F pressure
dew point, remove particulates down to 1 micron, and reduce
lube oil content to .008 PPM. 

The Prep 40 is plug-n-play. The cooler, moisture separator, filters,
and dryer are fully integrated at the Van Air Systems factory in
Lake City, Pennsylvania. Just connect compressed air lines, supply
115v power, and start delivering clean, dry compressed air.

The Prep 40 is ideal for industrial facilities.

The Prep 40 provides back-up plant air to refineries, power 
generators, pharmaceutical producers, semi-conductors 
manufacturers, mines, pipeline inspection and cleaning 
operations, or any industrial facility requiring high quality 
compressed air.

Van Air Systems offers four Prep 40 sizes.

Conveniently aligned with common portable diesel compressor
sizes, the Prep 40 is available with capacities of 400, 800, 1200 and
1600 SCFM.

prep-40-side.jpg


STANDARD EQUIPMENT

• Inlet Y-strainer
• Regulator - lubricator
• Trim Cooler with air motor, 15°F approach
• Bulk moisture separator with auto drain
• Coalescing pre-filter, with auto drain
• Heatless regenerative dryer
• NEMA 4X control enclosure
• Power on/off switch
• Power on light
• Purge mufflers
• Failure to switch light
• PDV-500T Drain

• Hour meter
• Tower pressure gauges
• Visual moisture indicator
• Control air filter
• Nylon control air tubing
• Open frame fork lift skid
• Four point lifting lugs
• Activated alumina desiccant
• Canadian Registration Numbers (CRN)
• Safety relief valves
• Purge flow gauge
• Epoxy/polyurethane paint

OPTIONS
• Higher design pressure
• Customer specified paint color