The MDH mini air dryers can be used with fractional horsepower compressors. The MDH heatless air dryer can produce reliable, low dewpoints, and only take up a small amount of space. With its small footprint, it can be placed inside equipment cabinets for original equipment manufacturers (OEM’s) or at a point of use in your production facilities.

  • Very dry outlet air to -100° F dew point
  • Flow capacities of 0.1 SCFM to 3.2 SCFM
  • Efficient drying at pressures of 30 PSIG to 120 PSIG
  • Miniature design requires minimal space in OEM equipment
  • Install at point-of-use or use with fractional horsepower air compressors
  • Precision orifices to control purge
  • solid-state timer with memory for accurate cycling
  • Non-plugging and non-corroding purge mufflers
  • Power consumption is 6 watts or less

 

 BROCHURE

  MDH1 MDH2 MDH3 MDH4 MDH5 MDH6
Flows (SCFM) at 100 PSIG
Inlet Flow 0.4 0.8 1.1 1.6 2.4 3.2
Purge Flow 0.1 0.2 0.27 0.4 0.6 0.8
Outlet Flow 0.3 0.6 0.83 1.2 1.8 2.4
*Flows (SCFM) at 50 PSIG
Inlet Flow 0.21 0.4 0.53 0.82 1.36 1.65
Purge Flow 0.09 0.18 0.23 0.36 0.62 0.71
Outlet Flow 0.12 0.22 0.3 0.46 0.74 0.94
*with orifice change
Additional Specifications
Inlet / Outlet Ports 1/8" 1/4"
Power Requirements 115 VAC, Single Phase, 50/60 Hz or 220 VAC, Single Phase, 50/60 Hz
12 or 24 VDC
Maximum Temperature 120°F ambient
Maximum Pressure 120 PSIG
Outlet Dew Point Standard: -40°F pressure dew point with 100°F saturated inlet
Optional: -100°F atmospheric dew point
Weight 1.4 lbs 1.5 lbs 1.6 lbs 1.9 lbs 2.2 lbs 3.1 lbs
Dimensions
  H W D A B  untitled.jpg
MDH1 7" 3.5" 3.3" 6.6" 3.1"
MDH2 10.3" 3.5" 3.3" 9.9" 3.1"
MDH3 8.8" 4" 3.5" 8.4" 3.6"
MDH4 10.1" 4" 3.5" 9.7" 3.6"
MDH5 9.5" 5" 3.8" 9" 4.5"
MDH6 11.5" 5" 3.8" 11" 4.5"