VAN AIR SYSTEMS F200-1250 COMPRESSED AIR FILTER, 3" In/Out Conn.

(No reviews yet) Write a Review
$2,360.00
Adding to cart… The item has been added Request QUOTE

PRODUCT DETAILS

Van Air Systems F200 Series compressed air and gas filters are rugged, industrial grade filters designed to remove oil, compressor lubricant, mists, and water droplets.  F200 filters are constructed of cast aluminum and are available in a range of sizes and configurations, with nominal flow ratings from 15 CFM to 1250 CFM.  Nominal flow ratings are based on an operating pressure of 100 PSI.  An operating pressure above 100 PSI increases the flow capacity of the filter; operating below 100 PSI decreases the capacity of the filter.  The maximum allowable working pressure of all F200 Series filters is 250 PSIG.  F200 Series filters meet oil and solid particle removal specifications of ISO standard 8573-1.  Pressure loss is a hidden operating cost in compressed air systems.  F200 Series filters are designed to minimize pressure loss.  Each filter includes a pop-up differential pressure indicator that changes from green to red when the filter element needs replacing. F200 Series filters are approved use with compressed air, sweet natural gas (manual drain only), and all inert gases. F200 Series filters are cast, machined, and assembled in both the U.S. and U.K.

FEATURES AND BENEFITS

  • Flows up to 1250 scfm at 100 PSIG
  • 3" NPT
  • Maximum working pressure, 250 PSIG at 225°F (RD grade element 250 PSIG at 80°F)
  • Heavy-duty cast aluminum design
  • Push-on element for quick servicing
  • Standard pop-up indicator signals when element needs replacing
  • Large reservoirs facilitate draining of coalesced water and liquids
  • Nine filter element grades, 25 micron - .01 micron
  • Remove oil aerosols, oil vapors, liquids, and sub-micron particles
  • Long-lasting elements reduce maintenance costs

APPLICATIONS

  • Instrument air & gas
  • Pre-filter for deliquescent, regenerative dryers and refrigerated dryers
  • Pneumatic hand tools
  • Abrasive blasting
  • Dust collectors
  • Air cylinders, motors
  • Blow molding
FILTRATION GRADE OPTIONS
Element   Particle Removal   Max Oil Carryover Max
Inlet Temp
Clean Dry Pressure Drop End Cap Flow
Grade Purpose Down To Efficiency PPM w/w ºF PSI Color Direction
AA Extra coarse coalescing 25µ 100@25µ 7.8 225 0.40 White In / Out
A Coarse coalescing 100@5µ 3.9 225 0.50 Green In / Out
B General purpose coalescing 99.99@.6µ 0.78 175 0.75 Red In / Out
C High efficiency coalescing .01µ 99.9999@.6µ 0.008 125 1.50 Blue In / Out
RAA Extra coarse particulate 25µ 100@25µ NA 225 0.40 Black Out / In
RA Coarse  particulate 100@5µ NA 225 0.50 Green Out / In
RB General  purpose  particulate 99.99@.6µ NA 225 0.75 Red Out / In
RC High efficiency particulate .01µ 99.9999@.6µ NA 225 1.50 Blue Out / In
RD Vapor  absorbing .01µ 99.9999@.6µ 0.004 80 1.50 White Out / In
RD elements have no outer drainage layer. The perforated stainless steel outer core is visible.        

 

Downloads

Brochure