BVD-2S34 - 3/4" NPT Stainless Ball Valve Drain

(No reviews yet) Write a Review
Adding to cart… The item has been added Request QUOTE


The BVA Series is a heavy duty condensate or process drain consisting of a gear-motor operated ball valve. A drain cycle is initiated externally by signal from a timer, PLC, or simple push button. The signal energizes the gear motor to rotate the ball valve 180° from closed to open and back to a closed position. The drain cycle lasts for approximately 5 seconds during which condensate is drained and then returned to a closed, stand-by condition.


Low Cost Alternative to manual drains
Straight-through flow pattern Prevents clogging
Robust seat and seal design Provides extended service on the most demanding applications
Available in several sizes Can be used on wide range of flows
NEMA 4X enclosure Rugged and non-corrosive
Available in different pressure ratings up to 2000 PSI Can be used on wide range of applications
Versatile for many applications

Can be used for filters, air receivers, air dryers, separators and aftercoolers


Inlet/Outlet 1/4" NPT / 1/2" NPT / 3/4" / 1"
Drain Cycle Frequency External signal
Drain Cycle Time 5 secs.
Pressure Bronze – up to 600 PSI
Stainless Steel – up to 2000 PSI
Ground Cord 8 ft.
Power 115 V, 60 Hz., 1 Ph.
Weight 6 lbs.
NEMA 4X Enclosure 6" X 3" x 3"


Stock No. Description
BVA-2B14 / 2S14 1/4" NPT Bronze / Stainless Steel Valve
BVA-2B12 / 2S12 1/2" NPT Bronze / Stainless Steel Valve
BVA-2B34 / 2S34 3/4" NPT Bronze / Stainless Steel Valve
BVA-2B10 / 2S10 1" NPT Bronze / Stainless Steel Valve