HR2 MINI HEATLESS REGENERATIVE AIR DRYER

(No reviews yet) Write a Review
$2,205.00
Adding to cart… The item has been added Request QUOTE

PRODUCT DETAILS

**A general rule for compressor output is 3-5 SCFM per HP. Check in your compressor manual, or with the manufacturer**

MHL Mini Heatless Regenerative Dryers provide extremely dry air for point of use and low flow applications. These compressed air dryers are simple to install, and easy to maintain. They deliver a -40°F pressure dew point to protect pneumatic equipment and processes from the harmful and costly effects of compressed air moisture. In critical applications, MHL Series dryers can deliver a -100°F pressure dew point.

FEATURES AND BENEFITS

  • 6 SCFM @ 100 PSIG
  • Solid state timer with LED display for visual monitoring and built-in timer memory
  • Low air velocity through the desiccant bed for efficient drying
  • Large internal air passages to minimize pressure drop
  • Only 8 threaded components, 75% fewer potential leak points than competitive brands
  • Easily serviceable components
  • NEMA 4 electrical rating is standard
  • Moisture indicator
  • Tower pressure gauges

APPLICATIONS

  • Air bearings
  • Air brushings
  • Air operated pumps
  • Air turbines
  • Cable pressurization
  • Car wash controls
  • Dental offices
  • Gas chromatographs
  • Graphic printers
  • Laboratory instruments
  • Point-of-use drying for pneumatic tools and processes
  HR1 HR2 HR3 HR4 HR5 HR6 HR6.5  HR7
Flows (SCFM) at 100 PSIG
Inlet Flow 3 6 9 12 16 25 35 50
Purge Flow 0.8 1.6 2.4 3.2 3.4 5.4 7.8 10.8
Outlet Flow 2.2 4.4 6.6 8.8 12.6 19.6 27.2 39.2
*Flows (SCFM) at 150 PSIG
Inlet Flow 4.2 8.4 12.9 17.2 22.5 35.9 50.3 71.9
Purge Flow 0.8 1.5 2.4 3.3 3.4 5.5 8 11.1
Outlet Flow 3.4 6.9 10.5 13.9 19.1 30.4 42.3 60.8
*Flows (SCFM) at 50 PSIG
Inlet Flow 1.7 3.4 5.1 6.8 9 14.1 19.6 28.2
Purge Flow 0.7 1.4 2.1 2.8 3 4.8 7.7 9.7
Outlet Flow 1 2 3 4 6 9.3 11.9 18.5
*with orifice change
Additional Specifications
Inlet / Outlet Ports 3/8" 1/2"
Power Requirements 115 VAC, Single Phase, 50/60 Hz or 230 VAC, Single Phase, 50/60 Hz
Maximum Temperature 120°F ambient
Maximum Pressure 150 PSIG
Outlet Dew Point -40°F pressure dew point (PDP) with 100°F saturated inlet
Weight 8 lbs 9 lbs 10 lbs 11 lbs 29 lbs 34 lbs 59 lbs 65 lbs
Dimensions
  H W D P A B  mhl-drawing.jpg
HR1 13.6" 7.4" 5.2" 9.3" 5.8" 2.8"
HR2 18.2" 7.4" 5.2" 13" 5.8" 2.8"
HR3 17.3" 7.4" 5.2" 12.1" 5.8" 2.8"
HR4 21.1" 7.4" 5.2" 14.9" 5.8" 2.8"
HR5 33" 9.5" 6.5" 20.7" 7" 23.6"
HR6 41.9" 9.5" 6.5" 29.6" 7" 32.4"
HR6.5 39.3" 10" 7" 26.5" 9" 30.1"
HR7 46.3" 10" 7" 33.5" 9" 37.1"
 
Note: All HR7 dryers are shown with bracket top and bottom.
HR1 thru HR4 have a single 4-hole bracket.
 
 

Downloads

Brochure